ORBIMAT 300 CB
ORBIMAT 300 Cbasic
Новият ORBIMAT 300 Cbasic притежава новоразработена компютърна система, чието разнообразно проложение поставя нови стандарти пред техниката за орбитално заваряване. Използванено на съвременна електроника също така е предпоставка и за изключително компактен дизайн и намаляване на теглото. С общо тегло само 48кг (включително и модул за водно охлаждане) и размери 530 х 420 х 320мм, ORBIMAT 300 Cbasic е уникален в света по отношението цена / размер. Естествено ORBIMAT 300 Cbasic притежава вече доказаната функция ORBIMATIC AUTOPROGRAMMIERUNG. Чрез нея най-лесно могат да се зададът настройките на заваръчния процес като се посочат диаметър на тръбата, дебелина на стените, заваръчна тел и защитен газ. В стандартна версия, апаратът е настроен за студено телоподаване и така може да работи с всички видове заваръчни глави и клещи от програмата на ORBIMATIC.
| Дисплей | 10,5ʹʹ, цветен | |
| Захранващо напрежение | 3х400 VAC +- 15% | |
| Работен обхват | 3-300A | |
| Повторно включване | 100% | 200A |
| 60% | 300A | |
| Тегло | без ORBICOOL | 34кг |
| с ORBICOOL | 48кг | |
| Размери | без ORBICOOL | 530x420x320 мм |
| с ORBICOOL | 530x580x320 мм |
Orbital Welding Power Supply ORBIMAT 300 CB
|
ORBIMATIC is proud to announce the introduction of the new orbital welding powersource ORBIMAT 300CB. The new powersource is replacing the ORBIMAT 250C. The new ORBIMAT 300CB computer controlled power source is very compact in design and has a highly visible 10,5" colour monitor. |
 |
Features ORBIMAT 300 CB
The new ORBIMAT 300 CBasic implements a completely newly developed computer system, which sets with its various field of
applications new dimensions in Orbital Welding Technology. Use of the latest power-electronic components allows a more
compact design which gives massive reductions in weight. Weighting only 26 kg (incl.
water cooling!) and with dimensions of 530 x 370 x 220 mm, the ORBIMAT 300 CBasic is
unequalled world-wide in relation to size and output. Obviously the ORBIMAT 300 CBasic
includes the well proven ORBIMATIC AUTOPROGRAMMING with easy weld procedure
generation, which requires input of Diameter, Wall thickness, Material and Gas, as well
as the current slope function between a maximum 99 different Welding Levels.
The standard version of the ORBIMAT 300 CBasic includes the control system for coldwire-
feeding and is therefore able to run the complete range of ORBIMATIC Weld heads.
You have a wide range of Data-Logging available with multiple choice of documentation
and archiving. With the use of the full function keyboard (supplied with the machine)
additional information can be added to the data log file such as electrode type, welder’s
name, detailed application description and so on. Since printing after every weld may not
be practical under some conditions, the data log files can be saved temporarily on a COMPACT-FLASH-Card. ORBIMATIC offers
even an OFFLINE Soft/Hardware package, to allow transfer of Data Log files to any PC for achieving and administration.
PSS Pro Service System
The new PSS (Pro-Service-System) brings a new dimension to Orbital Welding. PSS allows the operator to easily detect any
failures on the system, which provides rapid maintenance on site. With a very systematic
order of each component, all parts are easy to locate and exchange. Key
components are connected by simple plugs. An LED panel is located on the rear
side of the machine and this allows the operator to identify an future problems without
having any technical knowledge, or the need for any other instruments.
Furthermore specific control functions of the system can be temporarily switched off
in order to complete, with extreme care, an immediate application on site. The machine
can then be taken to a workshop to be serviced and repair the fault .
ORBITWIN 300
For maximum production the ORBITWIN 300 can be used to allow simultaneous connect of 2 weld heads. The ORBITWIN
300 will allow the connection of two different head models. Each weld head can be assigned a separate welding procedure
and the ORBITWIN 300 will automatically transfer all services to the weld head in use and recall the associated procedure.
While one head is in use the other is isolated, allowing the operator to set one head while the other is welding.
Technical Data:
New 10,5“ colour display
Input Power 3x400 VAC +- 15%
Welding current 3-300A
Output Range 100% at 200A
60% at 300A
Weight without ORBICOOL 34 Kg
with ORBICOOL 48 Kg
Dimensions without ORBICOOL 530x420x320 mm
with ORBICOOL 530x580x320 mm
